Gas Detection
Welcome to our gas detection and gas monitors page! We are proud to offer a comprehensive range of gas sensors, detectors, and gas monitor solutions that utilize cutting-edge technologies such as IR, Electrochemical, Catalytic bead, and the innovative MPS sensor for TrueLEL and hydrogen detection. Our expertise in gas detection sets us apart from the competition, as we provide solutions for every gas detection application, including wireless, standalone, or traditional wired systems. We confidently claim to be the strongest gas detection company in Canada, as we only deliver rugged, reliable, industrial gas detection products and gas analyzers built to withstand the toughest applications.
Gas Detection
Stationary (LEL/Toxic/O2)
-
Our gas detectors can be used to sense hundreds of different gases. From common gas types such as natural gas to exotic toxic gases like Titanium Tetrachloride. Contact us if your target gas is not listed, chances are we can provide a solution for your specific application.
Our universal detectors feature non-volatile memory to store historical monitoring and calibration data. The real-time clock and calendar also flag all your alarm and calibration events. We offer an option of two fully configurable gas alarm models to meet your exact gas detection needs.
-
TrueLEL Gas Sensor Detector 14 LEL Gases, the only sensor on the market
New MPS Sensor to Detec Hydrogen, 5-10 Years Life, No Sensor Poisoning Unlike Catalytic Bead
10 Years IR Ammonia Sensor
15 Years LEL IR Sensor
Maintenace-Free Sensors
Explosion-Proof & Intrinsically Safe
2 & 3 Wire Sensors
Dual Gas Sensors
CSA Approved
Short Lead Time
Drift-Free Sensors
-
Wireless
-
Wireless gas detectors and wireless gas monitors are designed for continuous monitoring of toxic and combustible gases in the air. Due to their wireless nature, there is no complex system configuration that is needed. Once you assign a unique address to the wireless gas monitor or wireless gas detector your job is complete.
The wireless gas detection system will collect all the necessary data information from the sensor including the target gas type. There is onboard historical data logging available as well as RTU communication for PLC and DCS systems.
Additionally, our wireless gas monitors can easily connect to remote relay modules for audio and visual alarms or Emergency Shut Downs (ESD).
-
Reduced Installation cost - no more expensive cables and underground cable conduits.
No troubleshooting on the cables
No damage to the main controller in the event of lightning and storms
Easily add more sensors to the existing wireless network
No complicated system configurations
-
Personal Monitors
-
We offer single gas & the versatility of a multi-gas detector with the simplicity of a single-button operation. These compact portable gas detectors are suitable for detecting oxygen and toxic and flammable gases. Before an unsafe situation arises, the detector alarms with a powerful acoustic signal intense flashing red LED display, including a vibration alarm. Hear, see and feel!
-
• Multi-gas detector up to 4 gases
• Compact/thin and lightweight
• Visual, acoustic and vibration alarm
• ATEX / IECEx/CSA certified
• Display with backlight
• Simple one-button operation
• Shock-resistant housing
• Rechargeable & desposable
• Mode setting and event logging possibility
• Available with an EC, catalytic- or an infrared LEL sensor
-
Standalone
-
The SensePoint gas detector is R.C. Systems’ newest solution for single-point monitoring with local alarm indication. It is ideal for laboratory and commercial environments and steel plant CO monitoring. With a bright, vivid backlit colour display, Modbus and programmable relays, it will satisfy the most demanding application’s requirements.
The SensePoint gas detector supports all temperature compensated smart sensor types, including Electrochemical, Catalytic Bead, Infrared and Photoionization sensors. It even has Arctic options available for extreme low-temperature installations.
-
Colour backlit LCD Display
Display Color Changes with Alarm Status
Generation 2 Smart Sensor Compatible for increased signal stability
Sensor Life Indication
Remote Sensor Option
Non-intrusive One-Man Calibration
Temperature Compensation
RS-485 Modbus Port
3 programmable relays (Note: adding audio and/or visual alarm options to your configuration reduces relay availability. Ex: Piezo selection will occupy one programmable relay, and strobe selection will occupy a second programmable relay.)
Heated elements available for low temperature
Multi-color visual alarm indicator
Audible alarm indicator
-
Controllers
-
The ViewSmart is a 16-32-48-64 channel controller with simultaneous display and alarm functions for up to 64 input variables. 16-32-48-64 channel display modes and I/O modules arranged in groups of 16 channels allow economical configuration of systems.
This easy-to-configure, user-friendly controller is ideal for centralizing display and alarm functions in critical multipoint monitoring applications.
-
2 to 64 Channel Controller
Suitable for Class 1 Div II Area
CSA Approved
Highly Customized
Ethernet with Modbus® TCP Master/Slave and
web server for configuration and monitoring
Wireless Modbus interface available
Options such as Bridge Sensor Inputs, 4-20mA
inputs, 4-20mA outputs, discrete and programmable
alarm relays are supported via an I2C expansion bus
Data Logger onto SD card allows recording of minimum,
maximum and average values for one year
Magnetic keypad standard for non-intrusive operation
in potentially hazardous locations
Enclosures include wall mount NEMA 4X - NonMetallic - 316 SS, NEMA 7 and Rack/Panel Mount
24 HOUR TREND SCREEN
-
Calibration Bottle
-
Calibration standard gases are available at competitive prices, and various sizes canisters
-
Certified Gases
High Accuracy
Available within 2-3 weeks
-
Touchscreen Controller
-
CGD500 Touch is a gas detection control system that differentiates itself with an intuitive Touch screen HMI. With this touch screen, it is possible to quickly get an overview of the system’s status and make changes to it.
The CGD500 Touch is designed for stationary gas detection installations for the monitoring of explosive and/or toxic gases and oxygen with 8, 16 or 24 gas detectors.
If you have a more demanding requirement, please ask for our CGD 500 Touch Custom (up to 254 gas detectors, additional outputs, custom interfaces, special cabinets, etc.).
-
Start screen with an overview of the sensors and Event log with alarms, actuals (red) faults, and historical names (incl. locations, tag numbers, etc.)
Graphical alarm measurement per sensor
Map with sensors and zones.
1 x 9.7” TFT Touch HMI
-
Open Path Gas Detector
-
RC Systems’ Quasar 900 open-path gas detector utilizes the latest open-path IR technology to detect a wide range of hydrocarbon gases, including alkanes (methane to hexane) and ethylene. These units can be custom-tailored to your high-risk installation.
The Quasar 900 employs a “spectral fingerprint” analysis of the atmosphere using the DOAS (differential optical absorption spectroscopy) technique to deliver reliable results in extremely harsh environments where dust, fog, rain, snow, or vibration can cause a high signal reduction.
-
Wider coverage area of up to 200 meters
Most likely method to pick up any leak
Very high speed of response
No unrevealed failure modes
Beam block warning
Detector location is less critical
Size of gas hazard indicated
-
